Epson S020110 Photo Cartridge Refilling Instructions for Photo, Photo 700 and Photo EX printers.
Photo Color Cartridge
1. Use a piece of tape to seal the outlet hole(s) in the base of the cartridge. It is recommended to use a separate piece over each hole.
2. Attach the needle to the syringe and fill with the appropriate color ink.
3. Push needle through the label all the way into the cartridge of the proper filling hole. Inject ink very slowly into the sponge until the cartridge is full. (This will soak the sponge with ink and refill the reservoir).
4. Use adhesive tape to seal the hole(s) made in the top label. Note: The cartridge wil leak if the holes are not sealed properly.
5. Unused ink may be returned to the bottle. Rinse the syringe with water and dry between each color refill or store for further use.
6. Reinsert the cartridge leaving the adhesive tape on the outlet hole(s) and run 1 - 3 cleaning cycles as per printer instructions. If necessary leave cartridge in printer for up to 24 hours which allows ink to flow to the print head.
NOTE: This time is greatly reduced if cartridge is refilled before it is completely empty.
For extra syringes, needles or other tools please see our accessories page.
|
|