Canon BX-3 refilling instructions
Step 1:
Locate the ball bearing on the reservoir side of the cartridge.
Step 2:
Use a ballpoint pen or other suitable object to push the ball bearing into the cartridge.
Step 3:
Inject the ink into the opening where the ball bearing was. Do not over fill.
Step 4:
Use a piece of black electrical tape or Scotch tape and tape the opening shut. After waiting 15 minutes, clean the cartridge and reinstall in the printer.
Trouble Shooting:
If your machine prints in streaks or is missing lines, you should perform the print head cleaning procedure as described in the owner's manual. You can also soak just the print head in very hot water for about five minutes. This will usually loosen any clogs in the print head.
For extra syringes, needles or other tools please see our accessories page.
|
|